Register
Technician A says that the low level brake fluid switch on a master cylinder will turn on the brake warning light when the system is low on fluid. Technician B says that the low level switch also monitors
71.9k views
1 vote
Technician A says that the low level brake fluid switch on a master cylinder will turn on the brake warning light when the system is low on fluid. Technician B says that the low level switch also monitors the condition of the fluid and will activate the warning light when the brake fluid needs to be replaced. Who is correct?

User Adrian Seeley
by
5.0k points

1 Answer

2 votes

Answer:

Technician A

Step-by-step explanation:

The brake fluid switch or the brake switch is a sensor provided in the master cylinder monitors the brake fluid level in the vehicle. It is found inside the brake fluid reservoir. When the brake fluid level is too low, it warns the ABS by sending a signal. This device keeps us and the vehicle safe.

Thus in the context, technician A is correct.

User Em Ji Madhu
by
5.4k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

6.0m questions

7.8m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!