Register
Explain how an enhanced fluid power system improved efficiency in the following scenario. Oliver has designed a new dump truck that is emitting 50 percent less carbon and needs 60 percent less fuel to
190k views
1 vote
Explain how an enhanced fluid power system improved efficiency in the following scenario.

Oliver has designed a new dump truck that is emitting 50 percent less carbon and needs 60 percent less fuel to run. The savings will
allow his construction company to purchase two more vehicles.
HELP !!

User Martin Mendez
by
4.6k points

2 Answers

5 votes

Answer:

He can go a few places instead doing to many pit stops

Step-by-step explanation:

User Sneharghya Pathak
by
5.8k points
5 votes

Answer:

The correct answer is that the system may be equipped with microstructures to reduce the friction of the fluid.

Step-by-step explanation:

Oliver may have implemented a regenerative braking system, decreasing the amount of energy lost in the braking process. He also may have eliminated valves. Valves are highly susceptible to wear in a fluid power system. He may have used an actuator instead.

User Basil Battikhi
by
5.4k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

6.0m questions

7.9m answers

Other Questions

4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!