Register
What should a technician do before entering a confined space? Question 1 options: A) Post another worker outside the confined space. B) Take a radio or cell phone for emergency calls. C) Wear clothes that
101k views
2 votes
What should a technician do before entering a confined space? Question 1 options: A) Post another worker outside the confined space. B) Take a radio or cell phone for emergency calls. C) Wear clothes that are resistant to spontaneous arcing. D) Leave a note at the entry point.

User Neoevoke
by
6.0k points

1 Answer

3 votes

Answer:

C) Wear clothes that are resistant to spontaneous arcing.

Step-by-step explanation:

A confined area or space is one that has strict restriction against movement of people due to the availability of hazardous substance or material within the confined space. If there is need for anyone to enter the space, it is very important that the person make use of personal protective equipment (PPE).

Personal protective equipment are materials that are capable of inhibiting injury or hazard when used appropriately. Examples are: helmet, respirators, gloves, goggles, ear muffs etc.

Before a technician should enter a confined space, he/ she should use a PPE by wearing clothes that are resistant to spontaneous arcing.

User Levitt
by
5.4k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

6.5m questions

8.6m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!