Register
Adam wants to become a certified professional engineer what are the steps that you have to follow
176k views
4 votes
Adam wants to become a certified professional engineer what are the steps that you have to follow

User Merym
by
7.8k points

1 Answer

3 votes
Graduate from an ABET-accredited engineering program.
Pass the Fundamentals of Engineering (FE) exam.
Work as an engineer for four years.
Pass the Professional Engineering (PE) exam (you cannot take the PE exam without first passing the FE exam).
User NtFreX
by
8.4k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Where are all the controls on most circuits?
Link Copied!