Register
A water treatment plant processes 30,000 cubic meters of water each day. A square rapid-mix tank with vertical baffles and flat impeller blades will be used. The design detention time and velocity gradient
219k views
0 votes
A water treatment plant processes 30,000 cubic meters of water each day. A square rapid-mix tank with vertical baffles and flat impeller blades will be used. The design detention time and velocity gradient are 30 seconds and 900 s-1 Determine the power input, if the temperature of the water is 20°C. µ = 1 x 10-3 kg/m•s. 1kW = 1000 J/s, 1J = 1N•m = 1 kg•m2/s2. Note: you can use the equation in its current version.

User Vsz
by
7.5k points

1 Answer

4 votes

Answer:

P=8.44 kw

Step-by-step explanation:

[Find the given attachment for solution]

A water treatment plant processes 30,000 cubic meters of water each day. A square-example-1
User Woodrow
by
8.0k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.1m questions

11.7m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Where are all the controls on most circuits?
Adding moisture is the ONLY way to obtain saturated air from unsaturated air. a)-True b) False
Link Copied!