Register
A sinusoidal voltage source produces the waveform, v t = 1 + cos 2πft. Design a system with v t as its input such that an LED will light up when f exceeds 50 Hz. The LED has a forward built-in voltage
179k views
0 votes
A sinusoidal voltage source produces the waveform, v t = 1 + cos 2πft. Design a system with v t as its input such that an LED will light up when f exceeds 50 Hz. The LED has a forward built-in voltage of 2 V. It is okay if the LED flickers when it’s ON, but it should not light up at all when OFF (Hint: use an "ideal" filter along with other components).

User Josh Fraser
by
3.4k points

1 Answer

1 vote

Answer:

See explaination

Step-by-step explanation:

LM358 is the useful IC which works as buffer. It enables circuit to remove overloading effect on each other. Image is in attachment.

We can define a light-emitting diode (LED) as a semiconductor light source that emits light when current flows through it. Electrons in the semiconductor recombine with electron holes, releasing energy in the form of photons

See attached file for detailed solution of the given problem.

A sinusoidal voltage source produces the waveform, v t = 1 + cos 2πft. Design a system-example-1
A sinusoidal voltage source produces the waveform, v t = 1 + cos 2πft. Design a system-example-2
User Kallz
by
3.2k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

3.5m questions

4.5m answers

Other Questions

Implement this C program by defining a structure for each payment. The structure should have at least three members for the interest, principle and balance separately. And store all the payments in a structure
Solving for dominant strategies and the Nash equilibrium Suppose Andrew and Beth are playing a game in which both must simultaneously choose the action Left or Right. The payoff matrix that follows shows
The steady-state data listed below are claimed for a power cycle operating between hot and cold reservoirs at 1200 K and 400 K, respectively. For each case, evaluate the net power developed by the cycle,
Name the author the "the journey to the centre of the earth"​
The fully corrected endurance strength for a steel rotating shaft is 42 kpsi, the ultimate tensile strength is 120 kpsi, the yield strength Sy=65 kpsi, and the fatigue stress correction factor Kf = 1.96.
Link Copied!