Register
2: To measure an object accurately, what point on the ruler would you align with the object edge? A B C
6.9k views
5 votes
2: To measure an object accurately, what point on the ruler would you align with the object edge?

A
B
C

2: To measure an object accurately, what point on the ruler would you align with the-example-1
User IAmJersh
by
8.1k points

2 Answers

7 votes
The answer will be B because you always have to make sure that you have you object at 0 to measure accurately
User Gentian
by
7.8k points
6 votes

Answer:

B

Step-by-step explanation:

You always measure from point 0 to accurately measure something

User Allwin
by
8.4k points
← Prev Question Next Question →

No related questions found

Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
A 200 g projectile is fired with a velocity of 900 m/s toward the center of a 15 kg wooden block which rests on a rough surface. If the projectile penetrates and emerges from the back at a velocity of
The pressure at any point in a static fluid depends only on the Select one a)- depth, surface pressure, and specific weight. b)- specific weight. c)- surface pressure and depth. d)- depth and container
A face milling operation is to be performed on cast iron. Tool diameter is 5 inches, w = 2 inches, part length = 8 inches, depth of cut = 0.012 inches, f = 0.001 inch/tooth, and N = 250 RPM. Find: MRR,
Link Copied!