Register
Diffusion of Ammonia in an Aqueous Solution Ammonia (A)-water (B) solution ta 278 K and 4 mm thick is in contact with an organic liquid at this interface. The concentration of ammonia in the organic phase
218k views
1 vote
Diffusion of Ammonia in an Aqueous Solution Ammonia (A)-water (B) solution ta 278 K and 4 mm thick is in contact with an organic liquid at this interface. The concentration of ammonia in the organic phase is held constant and is such that the equilibrium concentration of ammonia at the interface is 2.0 wt% ammonia (density of aqueous solution is 991.7 Kg/m) The concentration of ammonia in water 4 mm away is 10 wt% (density of solution is 961.7 Kg/m). Water and the organic phase are insoluble in each other. The diffusion coefficient of NH3 in water is 1.24 × 10-9 m2/s.

(a) At steady state, calculate Na in Kmol/m-s

(b) Calculate NB. Explain.

User Mare
by
5.5k points

1 Answer

4 votes

Answer:

Step-by-step explanation:

The pictures below shows the whole explanation for the problem

Diffusion of Ammonia in an Aqueous Solution Ammonia (A)-water (B) solution ta 278 K-example-1
Diffusion of Ammonia in an Aqueous Solution Ammonia (A)-water (B) solution ta 278 K-example-2
Diffusion of Ammonia in an Aqueous Solution Ammonia (A)-water (B) solution ta 278 K-example-3
User SoH
by
4.8k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.3m questions

6.9m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!