Register
Calculate pressure at the mid-plane of an annular cylinder of iron powder pressed using double-action press. The punch pressure (i.e., applied pressure) is 100 MPa when the height of the pressed sample
42.5k views
3 votes
Calculate pressure at the mid-plane of an annular cylinder of iron powder pressed using double-action press. The punch pressure (i.e., applied pressure) is 100 MPa when the height of the pressed sample is 10 cm. The coefficient of friction is 0.1, radial-to-axial pressure ratio is 0.4, and the wall thickness of the annular compact is 2 cm.

User Dansarmo
by
4.2k points

1 Answer

2 votes

Answer:

81.87

Step-by-step explanation:

Please kindly check attachment for the step by step solution of the given problem.

Solution as an attached file.

Calculate pressure at the mid-plane of an annular cylinder of iron powder pressed-example-1
User DIANGELISJ
by
4.8k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.1m questions

6.7m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!