Register
Compute L, T, M, LC, and R and stations of the BC and EC for the circular curve with the given data of: I (delta) = 22°15′00" and E = 23.4604 and the P.I. station = 16+61.27. Express answers to .01′ (ft.
28.7k views
3 votes
Compute L, T, M, LC, and R and stations of the BC and EC for the circular curve with the given data of: I (delta) = 22°15′00" and E = 23.4604 and the P.I. station = 16+61.27. Express answers to .01′ (ft.).

User Eric Kolotyluk
by
5.8k points

1 Answer

5 votes

Answer:

L = 475.718

T = 240.89 ft

M = 23.0195

LC = 472.728

R = 1225 ft

Step-by-step explanation:

See the attached file for the calculation.

Compute L, T, M, LC, and R and stations of the BC and EC for the circular curve with-example-1
Compute L, T, M, LC, and R and stations of the BC and EC for the circular curve with-example-2
User Nikul
by
6.7k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

6.5m questions

8.6m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!