Register
a vertical cylindrical container is being cooled in ambient air at 25 °C with no air circulation. if the initial temperature of the container surface is 100 °C, compute the surface heat-transfer coefficient
64.3k views
0 votes
a vertical cylindrical container is being cooled in ambient air at 25 °C with no air circulation. if the initial temperature of the container surface is 100 °C, compute the surface heat-transfer coefficient due to natural convection during the initial cooling period. the diameter of the container is 1m, and it is 2 m high

User Chameera Ashanth
by
8.3k points

2 Answers

1 vote

Answer:

Step-by-step explanation:

Find attach solution

a vertical cylindrical container is being cooled in ambient air at 25 °C with no air-example-1
a vertical cylindrical container is being cooled in ambient air at 25 °C with no air-example-2
a vertical cylindrical container is being cooled in ambient air at 25 °C with no air-example-3
User Poogy
by
8.0k points
3 votes

Answer:

the surface heat-transfer coefficient due to natural convection during the initial cooling period. = 4.93 w/m²k

Step-by-step explanation:

check attachement for answer explanation

a vertical cylindrical container is being cooled in ambient air at 25 °C with no air-example-1
a vertical cylindrical container is being cooled in ambient air at 25 °C with no air-example-2
User Jlansey
by
8.8k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.1m questions

11.8m answers

Other Questions

4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Where are all the controls on most circuits?
Link Copied!