Register
A certain process requires 2.0 cfs of water to be delivered at a pressure of 30 psi. This water comes from a large-diameter supply main in which the pressure remains at 60 psi. If the galvanized iron pipe
135k views
2 votes
A certain process requires 2.0 cfs of water to be delivered at a pressure of 30 psi. This water comes from a large-diameter supply main in which the pressure remains at 60 psi. If the galvanized iron pipe connecting the two locations is 200 ft long and contains six threaded 90o elbows, determine the pipe diameter. Elevation differences are negligible.

User Nischalinn
by
7.7k points

2 Answers

3 votes

Answer: you need to do it on your own first

Step-by-step explanation:

User Akzy
by
7.2k points
0 votes

Answer:

determine the pipe diameter. = 0.41ft

Step-by-step explanation:

check the attached file for answer explanation

A certain process requires 2.0 cfs of water to be delivered at a pressure of 30 psi-example-1
A certain process requires 2.0 cfs of water to be delivered at a pressure of 30 psi-example-2
A certain process requires 2.0 cfs of water to be delivered at a pressure of 30 psi-example-3
A certain process requires 2.0 cfs of water to be delivered at a pressure of 30 psi-example-4
A certain process requires 2.0 cfs of water to be delivered at a pressure of 30 psi-example-5
User JockX
by
7.6k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.4m questions

11.0m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!