Register
What should you always do before making any alignment adjustments? A) Perform necessary repairs to worn or damaged suspension components. B) Decide whether you should adjust the front or the rear first.
119,169 views
18 votes
18 votes
What should you always do before making any alignment

adjustments?
A) Perform necessary repairs to worn or damaged suspension components.
B) Decide whether you should adjust the front or the rear first.
C) Road test the vehicle over a bumpy road.
D) Check for DTC's.
Back
Next

User Ayman Barhoum
by
2.8k points

1 Answer

8 votes
8 votes

Answer:

A) Perform necessary repairs to worn or damaged suspension components

User Gmoshkin
by
2.9k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

3.3m questions

4.2m answers

Other Questions

The fully corrected endurance strength for a steel rotating shaft is 42 kpsi, the ultimate tensile strength is 120 kpsi, the yield strength Sy=65 kpsi, and the fatigue stress correction factor Kf = 1.96.
Regulation 433.3.3 gives six examples where th are permitted for safety reasons. Can you fill in the missing words? Exciter Drop zone for rotating machines. Supply circuits of lifting Dron zone
A machine component is subjected to an axial load that varies from 3000 lb compression to 5000 lb tension. Determine the combination of maximum and minimum stresses to which the member could probably be
Engine oil flows through a 25‐mm‐diameter tube at a rate of 0.5 kg/s. The oil enters the tube at a temperature of 25°C, while the tube surface temperature is maintained at 100°C. For a 100‐m long tube,
Explain what criteria and constraints are and why they are important to include in the design brief.
Link Copied!