Register
When we apply the 10 Hz output, which is within the pass band of the filter, we see that we get nearly the same sinusoid in the output except for a time delay. How is the time delay a signal experiences
197k views
4 votes
When we apply the 10 Hz output, which is within the pass band of the filter, we see that we get nearly the same sinusoid in the output except for a time delay. How is the time delay a signal experiences as it passes through a system related to the phase characteristic of the system response?

User Fxnn
by
5.8k points

1 Answer

7 votes

Answer:

Step-by-step explanation:

Time delay of a signal is the period shift it undergoes, this periodic shift or phase shift is as a result of the amount of time it takes the processor to determine the equations.

User Wik
by
5.8k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.9m questions

7.7m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Link Copied!