Register
An oil preheater consists of a single tube of 10 mm diameter and 5 m length, with its surface maintained at 175 C by swirling combustion gases. The engine oil (new) enters at 75 C. What flow rate must
2.4k views
3 votes
An oil preheater consists of a single tube of 10 mm diameter and 5 m length, with its surface maintained at 175 C by swirling combustion gases. The engine oil (new) enters at 75 C. What flow rate must be supplied to maintain an oil outlet of 100

User Rageit
by
8.2k points

1 Answer

4 votes

Answer:

The answer and explanation is attached

Step-by-step explanation:

An oil preheater consists of a single tube of 10 mm diameter and 5 m length, with-example-1
User Chaniqua
by
7.7k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.8m questions

11.4m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Adding moisture is the ONLY way to obtain saturated air from unsaturated air. a)-True b) False
Vitrification is a process of: a. Chemical reaction bonding of aggregate ceramic powder b. Cementing aggregate ceramic powder with a liquefied material c. Solid-state diffusion of aggregate ceramic powder
Link Copied!