Register
Steel balls 12 mm in diameter are annealed by heating to 1100 K and then slowly cooling to 380 K in an air environment for which [infinity] 325 K and 20 W/m2·K. Assuming the properties of the steel to
140k views
5 votes
Steel balls 12 mm in diameter are annealed by heating to 1100 K and then slowly cooling to 380 K in an air environment for which [infinity] 325 K and 20 W/m2·K. Assuming the properties of the steel to be 40 W/m·K, 7800 kg/m3, and 600 J/kg·K, estimate the time required for the cooling process.

User GuavaMantis
by
8.4k points

1 Answer

6 votes

Answer:

0.3117 hour required for the cooling process.

Step-by-step explanation:

See attached pictures.

Steel balls 12 mm in diameter are annealed by heating to 1100 K and then slowly cooling-example-1
Steel balls 12 mm in diameter are annealed by heating to 1100 K and then slowly cooling-example-2
User Roman Toasov
by
8.8k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.2m questions

11.8m answers

Other Questions

4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Where are all the controls on most circuits?
Adding moisture is the ONLY way to obtain saturated air from unsaturated air. a)-True b) False
Link Copied!