Register
A turbine produces shaft power from a gas that enters the turbine with a (static) temperature of 628 K, a velocity of 143 m/s and a stagnation pressure of 14 atm. The gas exits the turbine with a stagnation
175k views
1 vote
A turbine produces shaft power from a gas that enters the turbine with a (static) temperature of 628 K, a velocity of 143 m/s and a stagnation pressure of 14 atm. The gas exits the turbine with a stagnation temperature of 275 K and a stagnation pressure of 0.95 atm. The gas passing through the turbine has a molecular weight of 16 and a specific heat ratio of 1.45. What is the stagnation temperature of the gas entering the turbine? Assuming the turbine is adiabatic, is it also reversible?

User Gee Bee
by
5.7k points

1 Answer

3 votes

Answer:

Step-by-step explanation:

The detailed step by step calculation and appropriate formula is as shown in the attached file.

A turbine produces shaft power from a gas that enters the turbine with a (static) temperature-example-1
User Gregor Sturm
by
5.5k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.9m questions

7.8m answers

Other Questions

4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!