Register
1. A wood board is one of a dozen different parts in a homemade robot kit. The width, depth, and height dimensions of the board are 7.5 x 14 x 1.75 inches, respectively. The board is made from southern
125k views
3 votes
1. A wood board is one of a dozen different parts in a homemade robot kit. The width, depth, and height dimensions of the board are 7.5 x 14 x 1.75 inches, respectively. The board is made from southern yellow pine, which has an air dry weight density of .025 lb/in.3. a. What is the volume of the wood board? Precision = 0.00

User Franck Anso
by
5.7k points

1 Answer

3 votes

Answer:

183.75 cubic inches.

Step-by-step explanation:

The volume of the wood board is determine by means of this expression:


V = w \cdot h \cdot l

By replacing variables:


V = (7.5 in) \cdot (14 in) \cdot (1.75 in)\\V = 183.75 in^(3)

User Moein
by
5.9k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

6.0m questions

7.8m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Where are all the controls on most circuits?
Link Copied!