Register
1. A wood board is one of a dozen different parts in a homemade robot kit. The width, depth, and height dimensions of the board are 7.5 x 14 x 1.75 inches, respectively. The board is made from southern
125k views
3 votes
1. A wood board is one of a dozen different parts in a homemade robot kit. The width, depth, and height dimensions of the board are 7.5 x 14 x 1.75 inches, respectively. The board is made from southern yellow pine, which has an air dry weight density of .025 lb/in.3. a. What is the volume of the wood board? Precision = 0.00

User Franck Anso
by
7.6k points

1 Answer

3 votes

Answer:

183.75 cubic inches.

Step-by-step explanation:

The volume of the wood board is determine by means of this expression:


V = w \cdot h \cdot l

By replacing variables:


V = (7.5 in) \cdot (14 in) \cdot (1.75 in)\\V = 183.75 in^(3)

User Moein
by
8.1k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.8m questions

11.4m answers

Other Questions

A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!