Register
Design a circuit that will output HIGH when the input is a prime number larger than 2 and smaller than 16. The input should be a 4-bit binary number. Design the circuit using a 4:16 decoder and other gates.
30.5k views
5 votes
Design a circuit that will output HIGH when the input is a prime number larger than 2 and smaller than 16. The input should be a 4-bit binary number. Design the circuit using a 4:16 decoder and other gates.

User Paul Tiarks
by
7.9k points

1 Answer

2 votes

Answer:

The detailed answer to the question is explained in the attached file.

Step-by-step explanation:

Design a circuit that will output HIGH when the input is a prime number larger than-example-1
Design a circuit that will output HIGH when the input is a prime number larger than-example-2
Design a circuit that will output HIGH when the input is a prime number larger than-example-3
User Iheanyi
by
8.6k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!