Register
A rod made of 60-40 brass is sliding over unlubricated hardened tool steel with a load of 320 N. The hardness of brass is 520 MN/m2. The wear co-efficient is 10-3. Find: a. The distance traveled to produce
232k views
0 votes
A rod made of 60-40 brass is sliding over unlubricated hardened tool steel with a load of 320 N. The hardness of brass is 520 MN/m2. The wear co-efficient is 10-3. Find: a. The distance traveled to produce a wear of volume of 0.01 mm3 by the adhesive wear of the brass rod. b. The distance traveled, if additional load of 0.0069 kN is applied and a wear volume 7 mm3

User Atrag
by
4.3k points

1 Answer

1 vote

Answer:

See attachment for detailed answer.

Step-by-step explanation:

A rod made of 60-40 brass is sliding over unlubricated hardened tool steel with a-example-1
User Jacco Dieleman
by
4.4k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.1m questions

6.7m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!