Register
Two parallel surfaces move relative to each other are separated by a gap of 0.375 in. The gap is filled by a fluid of with .00431 lb-sec/in2 viscosity. The relative motion is resisted by a shear stress
79.7k views
0 votes
Two parallel surfaces move relative to each other are separated by a gap of 0.375 in. The gap is filled by a fluid of with .00431 lb-sec/in2 viscosity. The relative motion is resisted by a shear stress of 0.25 lb/in2 due to the viscosity of the fluid. What is the velocity of the parallel surfaces above assuming the velocity gradient in the space between the surfaces is constant?

User TimeEmit
by
6.9k points

1 Answer

0 votes

Answer:

Velocity will be 21.75in/sec

Diagram well explains the calculation.

Two parallel surfaces move relative to each other are separated by a gap of 0.375 in-example-1
User Nllsdfx
by
7.2k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.3m questions

10.9m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!