Register
A rigid tank of 1 in3 contains nitrogen gas at 600 kPa, 400 K. By mistake someone lets 0.5 kg flow out. If the final temperature is 375 K what is then the final pressure?
14.6k views
2 votes
A rigid tank of 1 in3 contains nitrogen gas at 600 kPa, 400 K. By mistake someone lets 0.5 kg flow out. If the final temperature is 375 K what is then the final pressure?

User ZIronManBox
by
8.4k points

1 Answer

3 votes

Answer:

Final Pressure in the tank after letting 0.5 kg out of the tank is 504.6 kPa

A rigid tank of 1 in3 contains nitrogen gas at 600 kPa, 400 K. By mistake someone-example-1
A rigid tank of 1 in3 contains nitrogen gas at 600 kPa, 400 K. By mistake someone-example-2
A rigid tank of 1 in3 contains nitrogen gas at 600 kPa, 400 K. By mistake someone-example-3
User Berwyn
by
7.9k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.1m questions

11.8m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
A 200 g projectile is fired with a velocity of 900 m/s toward the center of a 15 kg wooden block which rests on a rough surface. If the projectile penetrates and emerges from the back at a velocity of
Link Copied!