Register
Given the following data, plot the stress-strain curves for the two unknown materials on the same set of stress-strain axes. Density4.43g/cm33.98g/cm3E114 GPa380 GPa0.340.22Yield stress (at 0.2% strain)830
97.5k views
3 votes
Given the following data, plot the stress-strain curves for the two unknown materials on the same set of stress-strain axes. Density4.43g/cm33.98g/cm3E114 GPa380 GPa0.340.22Yield stress (at 0.2% strain)830 MPaNot applicableUltimate tensile strength900 MPa550 MPaFailure stress840 MPa550 MPa% elongation14NegligibleWhat likely types are Materials A and B?

User Rrttrr
by
5.2k points

1 Answer

4 votes

Answer:

Step-by-step explanation:

See the attached pictures.

Given the following data, plot the stress-strain curves for the two unknown materials-example-1
Given the following data, plot the stress-strain curves for the two unknown materials-example-2
User Hbaltz
by
4.4k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.1m questions

6.7m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!