Register
what should be used to feed material into a machine? A.joy stick B.push stick C. your feet D. your hands​
12.4k views
1 vote
what should be used to feed material into a machine? A.joy stick B.push stick C. your feet D. your hands​

User Acapola
by
3.3k points

1 Answer

1 vote

Answer:

B. Push stick

Step-by-step explanation:

A joy stick is used to play video games, and using either your hands or feet to feed material into a machine could be hazardous and cause injury.

User CuriousSuperhero
by
3.8k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

3.5m questions

4.4m answers

Other Questions

Implement this C program by defining a structure for each payment. The structure should have at least three members for the interest, principle and balance separately. And store all the payments in a structure
The steady-state data listed below are claimed for a power cycle operating between hot and cold reservoirs at 1200 K and 400 K, respectively. For each case, evaluate the net power developed by the cycle,
Regulation 433.3.3 gives six examples where th are permitted for safety reasons. Can you fill in the missing words? Exciter Drop zone for rotating machines. Supply circuits of lifting Dron zone
A machine component is subjected to an axial load that varies from 3000 lb compression to 5000 lb tension. Determine the combination of maximum and minimum stresses to which the member could probably be
Engine oil flows through a 25‐mm‐diameter tube at a rate of 0.5 kg/s. The oil enters the tube at a temperature of 25°C, while the tube surface temperature is maintained at 100°C. For a 100‐m long tube,
Link Copied!