Register
Which option describes the best material for the project described in the following scenario? A bathtub is being designed that will ergonomically shape itself to a person's body, thereby requiring less
218k views
5 votes
Which option describes the best material for the project described in the following scenario?

A bathtub is being designed that will ergonomically shape itself to a person's body, thereby requiring less
material to produce.


Metals are malleable & are excellent thermal conductors, but they do corrode & oxidize.

Wood is not always moisture-proof, but it is renewable & easily obtainable.

Glass is a good insulator, but it is easily breakable.

Plastic is economic, easily cleanable, & moldable.

User Mzq
by
4.1k points

2 Answers

1 vote

Answer: Its "D"

Step-by-step explanation:

Did the same question on EDG 21 for Engineering and Design

User Bimal Poudel
by
4.9k points
6 votes

Answer:

I think the answer is:

(4) Plastic is economic, easily cleanable, & moldable

Step-by-step explanation:

User Mephisztoe
by
6.0k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.3m questions

6.9m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!