Register
5. If you use pipe in a footing drain, there should be surface clean-out(s) located O A. right next to the house. O B. every 50 ft. O C. every 100 ft O D. near the discharge point,
152k views
0 votes
5. If you use pipe in a footing drain, there should be surface clean-out(s) located

O A. right next to the house.
O B. every 50 ft.
O C. every 100 ft
O D. near the discharge point,

User James Wulkan
by
7.9k points

1 Answer

2 votes

Answer:

b because if u got the sewer and septic system

User Joshua Comeau
by
7.8k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Adding moisture is the ONLY way to obtain saturated air from unsaturated air. a)-True b) False
The pressure at any point in a static fluid depends only on the Select one a)- depth, surface pressure, and specific weight. b)- specific weight. c)- surface pressure and depth. d)- depth and container
A face milling operation is to be performed on cast iron. Tool diameter is 5 inches, w = 2 inches, part length = 8 inches, depth of cut = 0.012 inches, f = 0.001 inch/tooth, and N = 250 RPM. Find: MRR,
Link Copied!