Register
It is the same as force. b. Stress that is created by plate collision is the same everywhere and reflects the total force produced by the interacting plates. c. It is the change in shape produced by strain.
211k views
3 votes
It is the same as force. b. Stress that is created by plate collision is the same everywhere and reflects the total force produced by the interacting plates. c. It is the change in shape produced by strain. d. Stress that is developed during orogeny can be different at various locations.

User Zach Conn
by
4.0k points

1 Answer

6 votes

Answer:

Step-by-step explanation:

ωωωωωωωωω

User Eliarms
by
3.5k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

3.6m questions

4.5m answers

Other Questions

Solving for dominant strategies and the Nash equilibrium Suppose Andrew and Beth are playing a game in which both must simultaneously choose the action Left or Right. The payoff matrix that follows shows
The steady-state data listed below are claimed for a power cycle operating between hot and cold reservoirs at 1200 K and 400 K, respectively. For each case, evaluate the net power developed by the cycle,
The fully corrected endurance strength for a steel rotating shaft is 42 kpsi, the ultimate tensile strength is 120 kpsi, the yield strength Sy=65 kpsi, and the fatigue stress correction factor Kf = 1.96.
The cold drawn AISI 1040 steel bar with 25-mm width and 10-mm thick has a 6- mm diameter thru hole in the center of the plate. The plate is subjected to a completely reversed axial load that fluctuates
"The transistor base-emitter voltage (VBE) a. increases with an increase in temperature. b. is not affected by temperature change. c. decreases with an increase in temperature. d. has no effect on collector
Link Copied!