Register
High-mount stop lamps are typically attached to the exterior of the vehicle using: A. nylon retainers. B. visible screws. C. rivets D. self-locking nuts.
16.0k views
5 votes
High-mount stop lamps are typically attached to the exterior of the vehicle using:

A. nylon retainers.
B. visible screws.
C. rivets
D. self-locking nuts.

User MBria
by
3.6k points

1 Answer

7 votes

Answer:

Option A

Step-by-step explanation:

Nylon retainers are knocking screws that have nylon coating on their thread which prevents them from loosening. It generally has two heads Hex Key an star screw. For high mount fixing, star screw is used as it is less prone to stripping. The nylon insert of a Nylock nuts enters into the screw and prevent it from loosening. It is useful in areas where there is high vibration.

Hence, option A is correct

User Trent Piercy
by
3.7k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

3.5m questions

4.5m answers

Other Questions

Implement this C program by defining a structure for each payment. The structure should have at least three members for the interest, principle and balance separately. And store all the payments in a structure
Solving for dominant strategies and the Nash equilibrium Suppose Andrew and Beth are playing a game in which both must simultaneously choose the action Left or Right. The payoff matrix that follows shows
The steady-state data listed below are claimed for a power cycle operating between hot and cold reservoirs at 1200 K and 400 K, respectively. For each case, evaluate the net power developed by the cycle,
Name the author the "the journey to the centre of the earth"​
The fully corrected endurance strength for a steel rotating shaft is 42 kpsi, the ultimate tensile strength is 120 kpsi, the yield strength Sy=65 kpsi, and the fatigue stress correction factor Kf = 1.96.
Link Copied!