Register
An ideal gas is contained in a closed assembly with an initial pressure and temperature of 250kN/m² and 115°C respectively. If the final volume of the system is increased 1.5 times and the temperature
62.5k views
0 votes
An ideal gas is contained in a closed assembly with an initial pressure and temperature of

250kN/m² and 115°C respectively. If the final volume of the system is increased 1.5 times and
the temperature drops to 35°C, identify the final pressure of the gas.​

User Krunal Indrodiya
by
6.2k points

1 Answer

5 votes

Answer:

Two identical containers each of volume V 0 are joined by a small pipe. The containers contain identical gases at temperature T 0 and pressure P 0 .One container is heated to temperature 2T 0 while maintaining the other at the same temperature. The common pressure of the gas is P and n is the number of moles of gas in container at temperature 2T 0

Step-by-step explanation:

User Mitchell
by
7.2k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

6.5m questions

8.6m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!