Register
When is it OK to weld a cracked suspension part?
215k views
0 votes
When is it OK to weld a cracked suspension part?

User Jayant Arora
by
2.8k points

1 Answer

3 votes

Answer:

When the crack is perpendicular to the spin direction.

Step-by-step explanation:

This will allow for maximum strength of the weld. As soon as the weld begins to grow significantly, the crack is no longer weldable and can become a hazard.

User Yasir
by
3.4k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

3.6m questions

4.6m answers

Other Questions

Solving for dominant strategies and the Nash equilibrium Suppose Andrew and Beth are playing a game in which both must simultaneously choose the action Left or Right. The payoff matrix that follows shows
The steady-state data listed below are claimed for a power cycle operating between hot and cold reservoirs at 1200 K and 400 K, respectively. For each case, evaluate the net power developed by the cycle,
Name the author the "the journey to the centre of the earth"​
The cold drawn AISI 1040 steel bar with 25-mm width and 10-mm thick has a 6- mm diameter thru hole in the center of the plate. The plate is subjected to a completely reversed axial load that fluctuates
"The transistor base-emitter voltage (VBE) a. increases with an increase in temperature. b. is not affected by temperature change. c. decreases with an increase in temperature. d. has no effect on collector
Link Copied!