Register
Consider a layer of insulation installed around a steam pipe. The radius of the pipe is R1 and the thickness of the insulation is R3-R1.The stream is maintained at a temperature TW and the air surrounding
10.0k views
22 votes
Consider a layer of insulation installed around a steam pipe. The radius of the pipe is R1 and the thickness of the insulation is R3-R1.The stream is maintained at a temperature TW and the air surrounding the insulation is at a temperature To and flows cross wise over the pipe. The air is flowed over the steam pipe at high enough velocity so a thermal boundary layer develops over the surface described by a heat transfer coefficient h.

Required:
Beginning with the heat equation, calculate the total quantity of heat being conducted per unit time (heat flow) through the insulation, Q (units: energy/time).

User Venechka
by
7.4k points

1 Answer

7 votes

Answer:

hmmmmmmmmmmmmmmmmmmmmmmmmmmm

Step-by-step explanation:

........

User Marquetta
by
6.3k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

7.0m questions

9.3m answers

Other Questions

4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Where are all the controls on most circuits?
Link Copied!