Register
g Calculate a better value for the convection coefficient using resources from heat transfer. Assume forced convection of the air inside the chimney moving at 4 ft/s. Assume convection on the outside of
27.1k views
20 votes
g Calculate a better value for the convection coefficient using resources from heat transfer. Assume forced convection of the air inside the chimney moving at 4 ft/s. Assume convection on the outside of the chimney is due to natural convection. Use the temperature plots or probe of the inside and outside surfaces to calculate the bulk fluid temperature and obtain accurate material properties for air based on these temperatures. Hint: Your new results for h should on the same order of magnitude of the value I provided. If it isn't, check your units. Update to you calculated values for h and resolve your model.

User Slal
by
6.9k points

1 Answer

4 votes

Answer:results for h should on the same order of magnitude of the value I provided. If it isn't, check your units. Update to you calculated values for h and resolve your model.

Step-by-step explanation:

User Sprksh
by
8.1k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.8m questions

11.4m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!