Register
In a CNC machining operation, the has to be moved from point (5, 4) to point(7, 2)along a circular path with center at (7,2). Before starting operation, the tool is at (5, 4).The correct G and M code for
491,602 views
8 votes
8 votes
In a CNC machining operation, the has to be moved from point (5, 4) to point(7, 2)along a circular path with center at (7,2). Before starting operation, the tool is at (5, 4).The correct G and M code for this motion is

User Rijk
by
2.9k points

1 Answer

13 votes
13 votes

Answer: hello your question is incomplete below is the complete question

answer:

N010 GO2 X7.0 Y2.0 15.0 J2.0 ( option 1 )

Step-by-step explanation:

Given that the NC machining has to be moved from point ( 5,4 ) to point ( 7,2 ) along a circular path

GO2 = circular interpolation in a clockwise path

G91 = incremental dimension

hence the correct option is :

N010 GO2 X7.0 Y2.0 15.0 J2.0

In a CNC machining operation, the has to be moved from point (5, 4) to point(7, 2)along-example-1
User Adrien Cadet
by
3.0k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

1.6m questions

2.0m answers

Other Questions

What is ventilation system on a boat for
True or false: The maximum tensile force a solid, cylindrical wire can withstand increases as the thickness of the wire increases. True False
Consider the following chain-reaction mechanism for the high-temperatureformation of nitric oxide, i.e., the Zeldovich mechanism: O + N2------ NO + N Reaction 1 N + O2------ NO + O Reaction 2 A. Write
Christopher has designed a fluid power system that repeatedly gets clogs. Which of the following objects should he choose to add to his fluid power system to prevent these clogs in the future? filter pipe
2. The following segment of carotid artery has an inlet velocity of 50 cm/s (diameter of 15 mm). The outlet has a diameter of 11mm. The pressure at inlet is 110 mm of Hg and pressure at outlet is 95 mm
Link Copied!