Register
In a CNC machining operation, the has to be moved from point (5, 4) to point(7, 2)along a circular path with center at (7,2). Before starting operation, the tool is at (5, 4).The correct G and M code for
491,601 views
8 votes
8 votes
In a CNC machining operation, the has to be moved from point (5, 4) to point(7, 2)along a circular path with center at (7,2). Before starting operation, the tool is at (5, 4).The correct G and M code for this motion is

User Rijk
by
2.9k points

1 Answer

13 votes
13 votes

Answer: hello your question is incomplete below is the complete question

answer:

N010 GO2 X7.0 Y2.0 15.0 J2.0 ( option 1 )

Step-by-step explanation:

Given that the NC machining has to be moved from point ( 5,4 ) to point ( 7,2 ) along a circular path

GO2 = circular interpolation in a clockwise path

G91 = incremental dimension

hence the correct option is :

N010 GO2 X7.0 Y2.0 15.0 J2.0

In a CNC machining operation, the has to be moved from point (5, 4) to point(7, 2)along-example-1
User Adrien Cadet
by
3.0k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

1.6m questions

2.0m answers

Other Questions

What is ventilation system on a boat for
True or false: The maximum tensile force a solid, cylindrical wire can withstand increases as the thickness of the wire increases. True False
Consider the following chain-reaction mechanism for the high-temperatureformation of nitric oxide, i.e., the Zeldovich mechanism: O + N2------ NO + N Reaction 1 N + O2------ NO + O Reaction 2 A. Write
2. The following segment of carotid artery has an inlet velocity of 50 cm/s (diameter of 15 mm). The outlet has a diameter of 11mm. The pressure at inlet is 110 mm of Hg and pressure at outlet is 95 mm
Hi! Have some points!
Link Copied!