Register
Continuous Wave Fiber Laser Cutters (the Bescutter) are best for cutting what materials? a. Stainless Steel b. Aluminum c. Mild Steel and Carbon Steel d. Wood e. Polycarbonate f. Acrylic
216k views
2 votes
Continuous Wave Fiber Laser Cutters (the Bescutter) are best for cutting what materials? a. Stainless Steel b. Aluminum c. Mild Steel and Carbon Steel d. Wood e. Polycarbonate f. Acrylic

User Adam Michalski
by
7.7k points

1 Answer

7 votes

Answer: A,B,C,D,E,F

It can cut all of them

User Mmagnuski
by
8.7k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.4m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
The pressure at any point in a static fluid depends only on the Select one a)- depth, surface pressure, and specific weight. b)- specific weight. c)- surface pressure and depth. d)- depth and container
A face milling operation is to be performed on cast iron. Tool diameter is 5 inches, w = 2 inches, part length = 8 inches, depth of cut = 0.012 inches, f = 0.001 inch/tooth, and N = 250 RPM. Find: MRR,
A three-point bending test was performed on an aluminum oxide specimen having a circular cross section of radius 3.5 mm (0.14 in.); the specimen fractured at a load of 950 N (215 lbf) when the distance
Link Copied!