Register
13. Once the remaining water has been added, let the mix sit undisturbed for about This allows the fine aggregate to fully saturate with the mix water. a. 30 minutes b. 5 minutes c. 1 hour d. 2 hours _;
216k views
2 votes
13. Once the remaining water has been added, let the mix sit undisturbed for about

This allows the fine aggregate to fully saturate with the mix water.
a. 30 minutes
b. 5 minutes
c. 1 hour
d. 2 hours
_; this

User Adheus
by
8.6k points

1 Answer

1 vote

Answer:

b. 5 minutes

Step-by-step explanation:

Based on the information available, the best way to allow the fine aggregate to fully saturate with the mix water is to let the mix sit undisturbed for about 5 minutes after the remaining water has been added. This brief period allows the fine aggregate to adequately saturate with the mix water, ensuring the proper hydration and bonding within the concrete mix.

User Tdjfdjdj
by
8.2k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.2m questions

11.9m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Vitrification is a process of: a. Chemical reaction bonding of aggregate ceramic powder b. Cementing aggregate ceramic powder with a liquefied material c. Solid-state diffusion of aggregate ceramic powder
Link Copied!