Question

When preparing to separate the torque converter from the flex plate, you see that there is no inspection cover to provide access. What method must be used to unbolt the converter?

Answer 1

To unbolt the torque converter from the flex plate without an inspection cover, you can rotate the engine using a wrench on the crankshaft pulley bolt or use a flex plate holder tool.

Step-by-step explanation:

In order to unbolt the torque converter from the flex plate when there is no inspection cover, a different method must be used. One common method is to rotate the engine using a wrench on the crankshaft pulley bolt. By turning the engine, you can access the bolts on the torque converter and remove them.

Another method is to use a special tool called a flex plate holder or flywheel holder. This tool is inserted between the flex plate and the engine block to prevent the engine from turning while you remove the torque converter bolts.

Both methods require some mechanical skill and caution to avoid damage to the engine and other components.