To find the total length of the pipe run, add the horizontal length to the vertical rise due to the slope. For example, with an 80-foot horizontal run and a 1:50 slope, the total length is approximately 81 feet 7 inches.
To determine the total length of the pipe run and find the length of the sloping section, it's essential to consider the slope's contribution. The slope of the pipe is typically measured as a vertical rise over a horizontal run. If the slope is given as a percentage, you can convert it to a ratio (e.g., 1:50). The vertical rise is then calculated by multiplying the horizontal run by the ratio.
Once the slope length is determined, add it to the horizontal length of the pipe run. Ensure that all measurements are in the same units, such as feet. Round the final answer to the nearest inch for precision.
For example, if the horizontal run is 80 feet and the slope is 1:50, the vertical rise is calculated as 80 * (1/50) = 1.6 feet. Add this to the horizontal run: 80 + 1.6 = 81.6 feet. Convert the decimal part to inches (0.6 feet is approximately 7.2 inches), resulting in a total length of approximately 81 feet 7 inches.