Question

Your Fire Alarm Control Panel sends you a trouble signal indicating that your 4th floor intelligent smoke detector is dirty and needs to be cleaned or changed. As the FLS Director what should you do first?

Answer 1

When the FLS Director receives a trouble signal indicating that a smoke detector is dirty, they should promptly inspect the detector and either clean or replace it, ensuring it functions properly afterward.

Step-by-step explanation:

As the Fire Life Safety (FLS) Director, the first action you should take when receiving a trouble signal indicating that a 4th floor intelligent smoke detector is dirty and requires cleaning or replacement, is to respond to the trouble signal promptly. This involves inspecting the smoke detector on the fourth floor to confirm its condition. Once confirmed, the smoke detector should be cleaned according to the manufacturer's instructions or replaced if it is too dirty or malfunctioning. The maintenance of the detector should be performed by a qualified individual to ensure proper functioning and to maintain the safety of the building's occupants.

Steps for Addressing a Trouble Signal in a Smoke Detector

1. Respond to the trouble signal by investigating the specific detector indicated.
2. Inspect the smoke detector for dirt and other obstructions.
3. Clean or replace the smoke detector as necessary.
4. Reset the system and verify that the smoke detector is functioning correctly.