Register
What are bonded roofs? 1) Roofs that carry a written warranty or insurance policy 2) Roofs that protect the building owner from leaks 3) Roofs that are damaged from leaks 4) Roofs that are not covered
6.6k views
3 votes
What are bonded roofs?

1) Roofs that carry a written warranty or insurance policy
2) Roofs that protect the building owner from leaks
3) Roofs that are damaged from leaks
4) Roofs that are not covered by warranty or insurance

User Amir Abiri
by
7.1k points

1 Answer

3 votes

Final answer:

Bonded roofs are roofs that carry a written warranty or insurance policy, providing protection to the building owner in case of leaks or damages.

Step-by-step explanation:

Bonded roofs refer to roofs that are covered by a warranty or insurance policy. Option 1) Roofs that carry a written warranty or insurance policy is the correct definition of bonded roofs. These warranties or insurance policies offer protection to the building owner in case of leaks or damages. They ensure that the owner is financially compensated or the roof is repaired in case of any covered events.

User Gajendra
by
8.7k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.8m questions

11.5m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!