Register
Which connectors are sometimes used in the place of RCA connectors for video electronics? A. RJ-11 B. RJ-45 C. RS-232 D. BNC
169k views
5 votes
Which connectors are sometimes used in the place of RCA connectors for video electronics?

A. RJ-11
B. RJ-45
C. RS-232
D. BNC

User Dellowar
by
7.8k points

1 Answer

4 votes

Final answer:

BNC connectors are often used as an alternative to RCA connectors in professional video applications due to their secure locking mechanism and compatibility with video signals.

Step-by-step explanation:

Connectors that are sometimes used in the place of RCA connectors for video electronics are BNC connectors. BNC connectors offer a secure connection with a locking mechanism and are commonly used in professional video applications. Unlike the other connectors listed, such as RJ-11 and RJ-45 which are typically used for telephony and networking respectively, and RS-232 which is primarily used for serial data communication, BNC connectors are specifically designed for analog and now even digital video signals, making them a suitable alternative to RCA connectors in certain applications.

User Ivan Velichko
by
7.4k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.2m questions

11.9m answers

Other Questions

4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!