Register
In IFR flight, you must do what with ATC instructions? A) Follow if convenient B) Comply if not busy C) Comply without deviation D) Request alternatives
106k views
5 votes
In IFR flight, you must do what with ATC instructions?

A) Follow if convenient
B) Comply if not busy
C) Comply without deviation
D) Request alternatives

User Sehrope
by
6.7k points

1 Answer

4 votes

Final answer:

In IFR flight, you must comply without deviation with ATC instructions.

Step-by-step explanation:

In IFR (Instrument Flight Rules) flight, you must comply without deviation with ATC (Air Traffic Control) instructions. ATC provides instructions to maintain proper separation between aircraft and ensure the safety of the airspace system. Deviation from these instructions could lead to potential conflicts and compromise the overall efficiency and safety of air traffic.

User Amanni
by
7.6k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.8m questions

11.4m answers

Other Questions

A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!