Register
Which standard is related to Fall Arresters? a) CSA Standard Z259.2.1-98 b) ANSI / ASSE Standard c) CEN Standard EN
100k views
1 vote
Which standard is related to Fall Arresters?

a) CSA Standard Z259.2.1-98
b) ANSI / ASSE Standard
c) CEN Standard EN

User Christoph Hansen
by
8.8k points

1 Answer

7 votes

Final answer:

The CSA Standard Z259.2.1-98 is related to Fall Arresters and provides guidelines for Fall Protection Systems.

Step-by-step explanation:

The CSA Standard Z259.2.1-98 is related to Fall Arresters. This standard is set by the Canadian Standards Association (CSA) and provides guidelines for Fall Protection Systems. It specifies the requirements for the design, testing, and use of fall arresters to ensure the safety of workers at heights.

User Jinet
by
8.4k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.9m questions

11.6m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!