Register
When should a handrail or fall protection be installed? a. Only for multi-story buildings b. After project completion c. As soon as construction begins d. Upon client request
218k views
0 votes
When should a handrail or fall protection be installed?

a. Only for multi-story buildings
b. After project completion
c. As soon as construction begins
d. Upon client request

User Alex Chiang
by
7.2k points

1 Answer

2 votes

Final answer:

A handrail or fall protection should be installed as soon as construction begins to ensure safety on the site.

Step-by-step explanation:

A handrail or fall protection should be installed as soon as construction begins. This is to ensure the safety of workers and anyone else on the site. Handrails and fall protection are essential in preventing falls from heights and are required by safety regulations for all types of buildings, not just multi-story ones.

User Leprosy
by
7.2k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.8m questions

11.5m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Where are all the controls on most circuits?
Link Copied!