Register
What building method might use a balloon frame? A) Post-and-Beam B) Timber Frame C) Balloon Frame D) Adobe Construction
186k views
2 votes
What building method might use a balloon frame?

A) Post-and-Beam
B) Timber Frame
C) Balloon Frame
D) Adobe Construction

User Thedethfox
by
7.2k points

1 Answer

3 votes

Final answer:

Balloon Frame is the building method that uses a balloon frame.

Step-by-step explanation:

The building method that might use a balloon frame is C) Balloon Frame. A balloon frame is a method of wood construction where the wall studs run uninterrupted from the foundation to the roof. This technique was popular in the United States during the late 19th and early 20th centuries.

User Drew Larson
by
7.2k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.8m questions

11.5m answers

Other Questions

A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Where are all the controls on most circuits?
Link Copied!