Register
Wood wall framing supporting 3/8 inch gypsum board shall not be spaced more than ____ inches on center. 1) 16 2) 20 3) 24 4) 32
96.2k views
3 votes
Wood wall framing supporting 3/8 inch gypsum board shall not be spaced more than ____ inches on center.

1) 16
2) 20
3) 24
4) 32

User Ntysdd
by
7.8k points

1 Answer

6 votes

Final answer:

Wood wall framing supporting 3/8 inch gypsum board should not be spaced more than 16 inches on center, which is about 40.64 cm.

Step-by-step explanation:

The wood wall framing supporting 3/8 inch gypsum board should not be spaced more than 16 inches on center. This is a common practice for the installation of studs, which are the vertical supports in the framing of a wall. When converted to centimeters, the distance of 16.0 inches is approximately 40.64 cm.

User CrApHeR
by
8.1k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.1m questions

11.8m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!