Question

What are the steps to reactivate the pumps when the E-Stop has been pressed?

1) Press E-Stop button into activate shut down alarm and then pull towards your chest to silence alarm
2) Open Breaker Panel to confirm E-Stop breaker is in center position (No Power/No Gas flow)
3) Take care of Emergency
4) Push E-Stop double breaker to OFF position; wait a few seconds
5) Then push it to the "ON" position. Allow it a few moments to reset
6) Wait for pumps to turn green (automatic reset) or reactivate

Answer 1

To reactivate pumps after an E-Stop activation, one must address the emergency, confirm the E-Stop breaker position, reset the breaker, and wait for the pumps to indicate an automatic reset or manually reactivate them, ensuring that all safety procedures are followed.

Step-by-step explanation:

To reactivate the pumps after an E-Stop has been pressed, please follow these steps carefully:

1. Press the E-Stop button to activate the shutdown alarm, and then pull it towards your chest to silence the alarm.
2. Open the Breaker Panel to confirm that the E-Stop breaker is in the center position, indicating No Power/No Gas flow.
3. Address the emergency that caused the activation of the E-Stop.
4. Push the E-Stop double breaker to the OFF position and wait a few seconds.
5. Then, push it to the ON position to allow it a few moments to reset.
6. Wait for the pumps to turn green which indicates an automatic reset, or manually reactivate the pumps.

It is crucial to ensure that all safety measures are followed and the original cause of the emergency has been completely resolved before attempting to reset and reactivate the pumps.