Question

In regards to non-bearing walls, a notch must not exceed ________?

1) 1/4 inch
2) 1/2 inch
3) 1 inch
4) 2 inches

Answer 1

In regards to non-bearing walls, a notch must not exceed 1/2 inch. Excessive notching can compromise the structural integrity of the stud, potentially leading to issues. Following local building codes and regulations is essential.

Step-by-step explanation:

In regards to non-bearing walls, a notch must not exceed 1) 1/4 inch 2) 1/2 inch 3) 1 inch 4) 2 inches.

When constructing or modifying non-bearing walls, there are specific guidelines to follow.

These guidelines ensure that structural integrity is maintained and that walls can properly perform their intended function, even when they are not load-bearing.

The correct answer to the question is 2) 1/2 inch.

This means that when notching a non-bearing wall stud, the notch should not be deeper than one-half inch.

Non-bearing walls are typically those that do not support any vertical loads other than their own weight and possibly some limited loads from above like cabinetry.