Register
minimum cut depth for most pro-cut on-car lathes is ______ per side. A. .001" B. .0025" C. .010" D. .020"
164k views
1 vote
minimum cut depth for most pro-cut on-car lathes is ______ per side. A. .001" B. .0025" C. .010" D. .020"

User Fbitterlich
by
8.3k points

1 Answer

1 vote
The minimum cut depth for most pro-cut on-car lathes is typically around .0025" per side, so option B is likely the correct choice.
User Leafo
by
7.0k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.8m questions

11.4m answers

Other Questions

An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Where are all the controls on most circuits?
Vitrification is a process of: a. Chemical reaction bonding of aggregate ceramic powder b. Cementing aggregate ceramic powder with a liquefied material c. Solid-state diffusion of aggregate ceramic powder
Link Copied!